Setting Thermostat - Evonic Fires Topaz Instruction Manual

Start by pressing the 'light' button on the left. This will activate
For heat setting, ensure the thermostat knob is turned fully to the
Once this has been completed, you can choose to have either
For 1kw, simply press the middle button with the single line at the
For 2kw, repeat this process but also turn the right switch on
Light switch
Thermostat
Setting the Thermostat
Note: This only applies to MANUAL fires
Ensure the fire is plugged in.
your LED's and bottom blower.
right (max temperature).
1kw or 2kw of heat given from your fire.
bottom (heat 1).
marked with 2 lines at the bottom (heat 2).
Heat 1
Heat 2
14.