Hole-In-Wall Installation - Evonic Fires Topaz Instruction Manual

Hole-in-wall Installation

To Install the appliance inside an existing wall cavity, please follow the
subsequent instructions.
Please refer to technical specification page for exact measurements, ensuring
the space you wish to install the appliance fits correctly.
This product has been designed to be installed into a
plaster board, dry walled, or existing masonry
chimney breast.
W
Please seek advice from a professional, with
reference to the structural integrity of the installation
site.
PLEASE NOTE: The screws and wall plugs provided
H
are only suitable for a solid wall fixing / when
installing onto a hollow-stud wall it is recommended
that heavy duty wall anchors or equivalent are used.
The product should never be sealed into a opening
Fig 1.
D
with the use of silicones or adhesives as this can also
alter the airflow and hinder any further servicing of
the product.
To successfully install this appliance into a wall
cavity, you must first start by checking the
specifications of the fire & and the cut-out you
wish install the fireplace into (W,D & H). Fig 1.
Fig 2.
Once you have established the correct
measurements, simply insert the fireplace into
the cavity ensuring it has ample insulation. Then
complete installation by attaching spacer using
the fixing points (Fig 2)and the frame using
magnets (Fig 3) in each corner.
Fig 3.
13.