Glass Removal - Evonic Fires Topaz Instruction Manual

To install the fuel set (Logs, Pebbles, Coals) the below steps must be taken
The front glass is held
in place by two
brackets, located at the
top and bottom of the
fire. Fig 1.
To remove the front glass,
start by identifying the key
hole slots located in each
bracket. There are 2 in
each bracket, one on the
left and one on the right.
Fig 2.
Once you have found the key
hole slots, lift the front glass
panel vertically, then
towards you to release the
brackets. Fig 3.

Glass Removal

Fig 1.
Fig 2.
Fig 3.
11.