Additional Functions - V-ZUG UnimaticWash V4000 Operating Instructions Manual

Table of Contents

Advertisement

4.3

Additional functions

Temperature setting
The temperature can be changed in steps of 10 °C or 15 °C, allowing slightly
soiled (not stained) textiles to be washed with a saving in energy.
Cold wash: Not heated
Spin speed
The spin speed can be changed in steps of 200 rpm (1200, 1000, 800, 600,
400 rpm, stop after rinsing, 1600, 1400 rpm). Delicates can thus be spun at a
low spin speed. However, this increases the drying time (greater energy con-
sumption for tumble drying).
Delayed start
Take advantage of cheap-rate electricity (setting range of up to 24 hours).
When the time set is reached, the programme starts automatically.
Fast forward / End of programme
Touch the
the programme sequence.
Pause / Door opener / Drum illumination
Touching the
gramme to pause. The drum illumination is switched on at the same time.
Touching the
the appliance is in a state that allows this action (depends on the water level,
temperature and speed).
Touch the flashing main programme button to end the pause and resume the
programme.
The drum illumination can be turned on and off.
button to skip individual parts of a programme at any time during
button 1× when a programme is running will cause the pro-
button again will cause the appliance door to open provided
4 Programme overview
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

11020

Table of Contents