Operation; Work Light; Usb Power Supply - Clarke JSM350 Operation & Maintenance Instructions Manual

OPERATION

WORK LIGHT

1. Push and hold the ON/OFF button
for 3 seconds to turn the work light
on.
2. Push the ON/OFF button again.
• The work light flashes on and
off.
3. Push the ON/OFF button again.
• The work light flashes with the
morse code SOS pattern.
4. Push the ON/OFF button again to turn the work light off.

USB POWER SUPPLY

• This will supply a maximum of 2.1A at 5V.
1. Put the USB cable into one of the
USB sockets.
2. Connect the other end of the
cable to your device.
3. Push the ON/OFF button to start
supplying power.
• This supplies a maximum of 2.1A
at 5V.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
7