General Safety Rules - Clarke JSM350 Operation & Maintenance Instructions Manual

Table of Contents

Advertisement

GENERAL SAFETY RULES

WARNING: ALL LEAD ACID BATTERIES GENERATE HYDROGEN GAS
DURING NORMAL OPERATION. THIS PROCESS INCREASES DURING A
PERIOD OF RAPID DISCHARGE.
WARNING: HYDROGEN GAS AND BATTERY ACID (SULPHURIC ACID) CAN
BE EXPLOSIVE, CORROSIVE TO SKIN, EYES AND HAIR, DAMAGING TO
CLOTHING AND METALS, FLAMMABLE, POISONOUS TO BREATHE.
1.
DO NOT leave it exposed to the elements. Avoid direct sunlight, direct
heat, rain/moisture etc.
2.
The device must only be used indoors or completely protected from the
rain. This also applies to any device being powered by the device.
3.
Do not operate the device if any of the cables are damaged. Consult
your Clarke dealer for repair or replacement of the parts.
4.
Do not operate the device if the case is damaged. Consult your Clarke
dealer or a qualified person for inspection and repair.
5.
To prevent the battery from overheating and consequent damage, do
not exceed our recommendations for the duration of jump starting.
6.
The unit is NOT designed to be used as a replacement for a vehicle
battery.
7.
NEVER allow the battery to become completely discharged.
8.
NEVER jump start the engine whilst the unit is being charged.
9.
NEVER attempt any repairs yourself. If you have a problem with the unit
contact your local CLARKE dealer.
10. Always keep your body and clothing dry. Never work in a damp area
without adequate insulation against electric shock.
11. Always store the unit out of reach of children.
12. Always wear safety glasses when working with lead acid batteries.
13. If splashed by battery acid, immediately flush the area of the splash with
clean water. If a burning sensation is felt or any blistering occurs, seek
medical help.
14. If battery acid comes into contact with the eyes, flush the eyes with clean
water continuously and seek medical help.
15. Always ensure that there is air circulating around the unit when in use.
16. When not in use, store in a safe dry place.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
3

Advertisement

Table of Contents
loading

Table of Contents