Table of Contents
Advertisement
17. Never allow the jumpstart leads, to touch each other or to touch the
same metal object.
18. Ensure the vehicle battery posts and battery clamps are perfectly clean
before use.
19. Connect the red clamp to the unearthed battery terminal first, (this is
usually the positive (+ve) terminal and coloured RED); then connect the
black clamp to the earthed battery terminal, (this is usually the negative (-
ve) terminal and coloured BLACK).
20. ALWAYS wear suitable protective clothing and eye protection when
working with lead acid batteries.
21. NEVER allow the cables to become wrapped around the operator or any
other person.
22. Wipe the body of the unit clean using a soft damp cloth, do not use
abrasives to clean this product.
ELECTRICAL CONNECTIONS
This device is supplied with a 13 amp, 230 volt (50Hz), charging adaptor for
connection to a standard, domestic electrical supply.
This appliance is of double insulated design. No earth conductor is provided.
If in any doubt, consult a qualified electrician. DO NOT attempt any electrical
repairs yourself.
SAFETY SYMBOLS
Class II appliance
(charger)
Suitable for indoor use
only (refers to mains
adaptor only)
Live centre pin
+
-
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Always read instructions
before use
Subject to Waste Electrical
& Electronic Equipment
Directive
4
Advertisement
Table of Contents
