Operation; Using The Worklight - Clarke JS5IN1 Operation & Maintenance Instructions Manual

OPERATION

USING THE USB POWER SUPPLY
1. Insert the USB cable into one of
the USB sockets on the side of the
unit.
2. Press the USB side of the INVERTER/
USB switch as shown.
• This will supply a maximum 5V
at 500mA.

USING THE WORKLIGHT

Use the light switch on the
1.
side of the unit to turn the
worklight on
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
.
9