Restrictions For Use - Swann AMU Rescon Operator's Manual

AMU Rescon
Safety Instructions
Modifications
1.3.
6
Modifications and instrument upgrades shall only be carried out by
an authorized Service Technician. SWAN will not accept responsi-
bility for any claim resulting from unauthorized modification or alter-
ation.
WARNING
Electrical Shock Hazard
If proper operation is no longer possible, the instrument must be
disconnected from all power lines, and measures must be taken
to prevent inadvertent operation.
 To prevent from electrical shock, always make sure that the
ground wire is connected.
 Service shall be performed by authorized personnel only.
 Whenever electronic service is required, disconnect instru-
ment power and power of devices connected to.
– relay 1,
– relay 2,
– alarm relay
WARNING
For safe instrument installation and operation you must read
and understand the instructions in this manual.
WARNING
Only SWAN trained and authorized personnel shall perform the
tasks described in this document.

Restrictions for use

The AMU Rescon is designed for determination of specific conduc-
tivity or resistivity in high purity water.
To avoid clogging the flow cell, prevent sand, oil or solids, from en-
tering into the flow cell.
Sufficient sample flow is coercive for the correct function of the in-
strument. To determine values near 18.18 MOhm-cm exactly, a
sample flow of 70–100 l/h is needed.
A-96.250.351 / 230320