Program List And Explanations; Messages; Diagnostics - Swann AMU Rescon Operator's Manual

AMU Rescon

Program List and Explanations

9.

1 Messages

1.1 Pending Errors
1.1.5
1.2 Message List
1.2.1

2 Diagnostics

2.1 Identification
2.1.3
2.1.4
2.2 Sensors
2.2.1
2.2.1.5
A-96.250.351 / 230320
Program List and Explanations
Provides the list of active errors with their status (active, acknowl-
edged). If an active error is acknowledged, the alarm relay is active
again. Cleared errors are moved to the Message list.
Shows the error history: Error code, date / time of issue and status
(active, acknowledged, cleared). 65 errors are memorized. Then
the oldest error is cleared to save the newest error (circular buffer).
In diagnostics mode, the values can only be viewed, not modified.
Desig.: Designation of the instrument.
Version: Firmware of the instrument (e.g. V6.20-11/16).
Factory Test: Test date of the instrument and motherboard.
Operating Time: Shows the operating time in years, days, hours,
minutes and seconds.
Cond.Sensor:
Current value: Shows the actual measuring value in MΩ or  S.
Raw value:
Shows the actual measuring value in MΩ or  S.
Cell Constant: Shows the cell constant.
Cal. History: Only visible in resistivity mode. Shows the values of
the last fine adjust.
Number: Calibration counter
Date, Time: Date and time of calibration
RSlo: Measured resistance
Max. 64 data records are memorized.
47