Lexmark B2338 User Manual page 86

Troubleshooting
Note: To find the region settings of the printer and toner cartridge, print the print quality test pages.
From the control panel, navigate to: Settings > Troubleshooting > Print Quality Test Pages.
Non‑Lexmark supply
The printer has detected a non‑Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-
party supplies or parts may affect the performance, reliability, or life of the printer and its imaging
components.
All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or associated components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage.
Damage caused by the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, from the control panel, press and hold X and
If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine Lexmark supply or part. For more information, see
supplies" on page
If the printer does not print after pressing and holding X and
the supply usage counter.
1
From the control panel, navigate to:
> Device >
2
Select the part or supply that you want to reset, and then select Start >
3
Read the warning message, and then select Continue >
4
Press and hold X and
Note: If you are unable to reset the supply usage counters, then return the item to the place of
purchase.
57.
> Maintenance >
simultaneously for 15 seconds to clear the message.
simultaneously for 15 seconds.
"Using genuine Lexmark parts and
simultaneously for 15 seconds, then reset
> Config Menu >
.
> Supply Usage And Counters >
.
86