Lexmark B2338 User Manual page 46

Understanding the printer menus
Menu item
Outbound Traffic Maximum
Speed
Off*
On
Enable SSLv2
Off*
On
Enable SSLv3
Off*
On
Enable TLSv1.0
Off
On*
Enable TLSv1.1
Off
On*
SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
SNMP Versions 1 and 2c
Enabled
Off
On*
Allow SNMP Set
Off
On*
Enable PPM MIB
Off
On*
SNMP Community
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable the printer maximum transfer rate.
Enable the SSLv2 protocol.
Enable the SSLv3 protocol.
Enable the TLSv1.0 protocol.
Enable the TLSv1.1 protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
Description
Configure Simple Network Management Protocol (SNMP) versions 1
and 2c to install print drivers and applications.
46