Lexmark B2338 User Manual page 36

Understanding the printer menus
Menu item
Auto CR after LF
On
Off*
Auto LF after CR
On
Off*
Tray Renumber
Assign MP Feeder
Off*
None
0–201
Assign Tray [x]
Off*
None
0–201
Assign Manual Paper
Off*
None
0–201
Assign Manual Envelope
Off*
None
0–201
Tray Renumber
View Factory Defaults
Tray Renumber
Restore Defaults
Print Timeout
Disabled
1–255 (90*)
Note: An asterisk (*) next to a value indicates the factory default setting.
HTML
Menu item
Font Name
[List of fonts] (Times*)
Font Size
1–255 (12*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control
command.
Configure the printer to work with print drivers or applications that use
different source assignments for the paper source.
Show the factory default setting assigned for each paper source.
Return all tray assignments to factory default values.
Set the printer to end a print job after it has been idle for the specified
amount of time in seconds.
Description
Set the font to use for HTML documents.
Set the font size to use for HTML documents.
36