7.15. DISASSEMBLING THE SADDLE HANDLEBARS
Figure 7.15-1
Figure 7.15-2
Page 7.18
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.1
Carry out the operations described in paragraph
7.14. Disassembling the saddle
1. Back off the two screws a using a 3-mm
Allen wrench and remove the covering plate.
2. Back off the bolts c using an 8-mm Allen
wrench (two bolts for each handlebar).
3. Remove the handlebars taking care not to
damage the cables.
To reassemble the saddle handlebars, carry out
the above steps in reverse order.
During reassembly, lock down the
screws c using a torque wrench set for
70 Nm.