Warning; Disassembling Procedures; Disassembling The Brake Casings And Side Casings - Technogym D93TNL Technical Service Manual

Table of Contents

Advertisement

8.3 WARNING

WARNING: Before disassembling, disconnect the power cord from the machine / wall socket.

8.4 DISASSEMBLING PROCEDURES

Refer to the Group Cycle (D92*N) Technical Service Guide.
Take into account that the Technogym Bike Live is equal to Group Cycle (D92*N), except for the
following points:
-
Technogym Bike Live does not have the generator;
-
Technogym Bike Live has only one belt, since does not have the generator;
-
In the Technogym Bike is not present the horizontal sliding of the handlebar;
-
Technogym Bike has the 21" Display Live.
8.5 DISASSEMBLING THE BRAKE CASINGS AND
SIDE CASINGS
- 64 -
A
TECHNOGYM BIKE LIVE Technical Service Guide
Remove the left screw indicated in the
figure, on the left side of the equipment,
to remove the left casing. (TOOL: key
wrench for Torx T25 head screw)
TSG-00187-EN - Uncontrolled copy if printed
Rev. 2.0

Advertisement

Table of Contents
loading

Table of Contents