Default Calories : Xxx; Default Distance; Enable Tgs - Technogym Recline Forma Service Maintenance Manual

9.1.8. D
EFAULT CALORIES
It is possible to set the calories for every exercise, with values ranging from 10 to 999. To change
the setting, when the LED matrix shows the current setting:
Press the ENTER key to modify the value: when the current parameter value starts to blink, press
the CLEAR key to erase the current value and then use the number keys to enter the desired new
value.
Press ENTER to confirm the changes made, and use the + or – effort level keys to move to the next
or preceding parameter.
The default value of this parameter is 300.
9.1.9. D
EFAULT DISTANCE
It is possible to set the distance for every exercise in Km, with values ranging from 1 to 999. To
change the setting, when the LED matrix shows the current setting:
Press the ENTER key to modify the value: when the current parameter value starts to blink, press
the CLEAR key to erase the current value and then use the number keys to enter the desired new
value.
Press ENTER to confirm the changes made, and use the + or – effort level keys to move to the next
or preceding parameter.
The default value of this parameter is KM 10.
9.1.10. E TGS
NABLE
It is possible to enable or disable the use of the TGS reader. To change the selection, when the LED
matrix shows the current setting:
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
Page 9.4
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.1

DEFAULT CALORIES : xxx

DEFAULT DISTANCE : KM xxx
TGS : xxx
TGS
ENABLED <default>
DISABLED