Table of Contents
Advertisement
10/100 Fast Ethernet Switch User's Guide
STAP Port Parameters
The STAP Port Parameters allows you to change the behind the
scene parameters of the Spanning Tree Algorithm at the port
level. The parameters for this section have been fully explained in
Chapter 5, Switch Management, see STA Operation Levels: On the
port level, and User-changeable parameters. It is recommended
that you read these sections and/or Chapter 5 first before
changing any of the parameters.
To change the STAP Port Parameters:
1. Choose Spanning Tree Algorithm from the main menu.
2. Choose STAP Port Parameters from the Spanning Tree
Algorithm menu.
3. Enter the desired port in the Port Number (1-8) field.
4. Enter the desired Port Path Cost in the Port Path Cost (1-
65535) field.
64
Figure 6-21. Protocol Parameters
Using the Console Interface
Advertisement
Table of Contents
