Table of Contents
Advertisement
100 M (speed indicator), 15
100BASE-TX networks, 2
100Mbps Fast Ethernet, 1
1024-1518 Octs, 56
128-255 Octs, 56
256-511 Octs, 56
512-1023 Octs, 56
64 Octs, 56
65-127 Octs, 56
AC inputs, 68
AC Power Connector, 13
AC power cord, 6
Access Rights
read only, 52
read/write, 52
Accessory pack, 6
Adding a New User, 42
Adding and Deleting Users, 42
Age Time, 57
Ageing out of filtering information,
26
Aging Time
very long, 26
very short, 26
Aging Time, definition of, 26
Aging Time, range of, 26
Alleviating network loop problems,
31
Attaching the mounting brackets.
See Rack Installation
Auto polarity detection, 4
Automatic learning, 26
Automatic topology re-configuration
Spanning Tree Algorithm, 27
Boot File Name, 48
10
I
Boot Protocol
BOOTP&TFTP, 48
TFTP ONLY, 48
Boot Server IP Address, 48
BOOTP (the BOOTstrap Protocol),
48
BOOTP broadcast, 46
BOOTP protocol, 46
BOOTP server, 46
Bridge Level, STA Operation Level
Bridge Identifier, 28
Bridge Priority, 28
Designated Bridge, 28
Root Bridge, 27
Root Path Cost, 28
Bridge MIB (RFC 1268), 5
Bridge Priority, 33
Broadcast Rx (Broadcast Frames
Received), 56
Bytes Rx (Bytes Received), 56
Bytes Tx (Bytes Sent), 56
Change the Port Configuration, 53
Changing the Protocol Parameters,
62
Changing the SNMP Trap Manager
Configuration settings, 51
Changing the STAP Port Parameters,
63
Changing theSNMP Manager
Configuration parameters settings,
52
Changing your Password, 41
CLEAR COUNTER, 54
Collisions, 55
Community name, definition of, 51
NDEX
Advertisement
Table of Contents
