Table of Contents
Advertisement
Under the Status heading a total of sixteen (16) status will
be displayed for each corresponding Source Addresses. The
status of the MAC addresses reflects how the Switch got the
address and should show either: (1) Management, (2)
Learned or (3) Self. The following explain each status:
Management:
address was obtained through the direct entry from a
network manager.
Learned:
was obtained from the LAN network.
Self:
This status means that the MAC address was
obtained from the Switch itself.
To display the Forwarding Table entries:
1. Choose Spanning Tree Algorithm from the main menu.
2. Choose Forwarding Table from the Spanning Tree
Algorithm menu.
3. In the Port(1-8) field, type in the desired port you would like
displayed.
4. Choose the PREPAGE command to see the previous page
and the NEXTPAGE command to see the next page. Choose
EXIT to leave the Forwarding Table.
Using the Console Interface
10/100 Fast Ethernet Switch User's Guide
This status indicates that the MAC
This status indicates that the MAC address
59
Advertisement
Table of Contents
