Table of Contents
Advertisement
10/100 Fast Ethernet Switch User's Guide
Figure 2- 2A. Attaching the mounting brackets to the 10/100
Fast Ethernet Switch
Then, use the screws provided with the equipment rack to mount
the Switch in the rack.
Figure 2-2B. Installing the 10/100 Fast Ethernet Switch in an
equipment rack
Power on
The DES-3208 Switch can be used with AC power sources 100 -
240 VAC, 50 - 60 Hz. The power switch is located at the rear of the
unit adjacent to the AC power connector and the system fan. The
Switch's power supply will adjust to the local power source
9
Unpacking and Setup
Advertisement
Table of Contents
