Table of Contents
Advertisement
The Source Address heading displays a total of ten (10)
addresses at a time; while a total of 40 MAC addresses may be
inputted for all of the ports. The Source Port heading displays
the respective port you would like associate with an inputted
Source Address.
Occasionally you may want to manually add entries to the switch's
forwarding table. To add an entry for a station,
1. Choose Spanning Tree Algorithm Parameters from the main
menu.
2. Choose Custom Filtering Table.
3. In the "Source Address" field, enter the Ethernet (MAC)
address of the station, in the form xx:xx:xx:xx:xx:xx; each xx
must be a hexadecimal number between 00 and FF.
4. In the "Source Port" field, type in the port number to
which the station is to be connected. For example: the value
"1" in this field would represent that the station will be
connected to port 1 of this switch; the value "0" would
Using the Console Interface
Figure 6-19. Custom Filtering Table
10/100 Fast Ethernet Switch User's Guide
61
Advertisement
Table of Contents
