Table of Contents
Advertisement
5. Items in UPPERCASE are commands. Moving the selection
to a command and pressing Enter will execute that
command, e.g. SAVE, EXIT, etc.
First Time Connecting To The Switch
The Switch supports user-based security that can allow you to
prevent unauthorized users from accessing the Switch or changing
its settings. This section tells how to log onto the Switch.
Note:
The passwords used to access the Switch are
case sensitive; therefore, "S" is not the same as
"s."
When you first connect to the Switch, you will be presented
with
the first login screen
down the Ctrl key, press the R key, and release both
keys) to call up the screen, if the
not appear. Also Ctrl+R can be used at any time to
refresh the screen.
Figure 6-1. Initial Screen, first time connecting to the Switch
Using the Console Interface
10/100 Fast Ethernet Switch User's Guide
(shown below). Press Ctrl+R (hold
first login
screen does
37
Advertisement
Table of Contents
