Front Panel; Back Panel - CyberHome DVR 1200MU Operation Manual

Front Panel

DVR 1200
DVD RECORDER WITH PROGRESSIVE SCAN PLAYBACK
DISC TRAY - Loads DVD+R/RW, DVD, CD-ROM,
1
VCD/SVCD, MP3, JPG and other optical discs.
FRONT DISPLAY - The front Vacuum Flourescent
2
Display shows information about the unit's
operation, such as current chapter and elapsed
time during playback.
3
OPEN/CLOSE - Press to open or close the disc
tray.
PLAY/PAUSE - Begins playback of a disc, chapter
4
or track. Press again during playback to pause,
and again to resume playback.
5 RECORD - Begins a Live Recording.

Back Panel

1
POWER CORD SOCKET - Plug the matching end
1
of the power cord into the unit before connecting
the other end to the wall socket.
2
ANTENNA IN / OUT - For Antenna or Cable TV
connection. This is Passthrough connection to TV,
this means it does NOT transfer the output signal
from the DVD Recorder to your TV (i.e., CH 3).
3 VIDEO INPUT 1 - Composite Video input for
recording. To select this input, use the SOURCE
button and choose VIDEO1.
4 STEREO AUDIO OUTPUT - Connect to TVs or
other audio equipment supporting Stereo Audio in.
5
COMPOSITE VIDEO OUTPUT - Standard video
output supported by most TVs.
6
S-VIDEO INPUT - S-VIDEO input for recording. To
select this input, press SOURCE and choose S-
VIDEO.
1
3
2
6 7
2
VIDEO
DVD R W
ON / STANDBY - Turns the unit on and sends the
6
unit to standby mode. In standby mode, the unit
will use a minute amount of power to enable
power-on by the remote control.
7
LEFT/RIGHT AUDIO IN 2 - Front Stereo Audio
Inputs for recording. These inputs are shared with
the VIDEO IN 2 input.
8
COMPOSITE VIDEO IN 2 - Front Composite
Video Input for recording. To select, use the
SOURCE key and select VIDEO IN 2.
4
Made in China
8
7
STEREO AUDIO INPUTS - Use with S-VIDEO
INPUT or VIDEO INPUT 1 for recording.
8 COAXIAL DIGITAL AUDIO OUTPUT - Use a
special Coaxial Digital Cable to send the raw
coded digital signal to devices supporting digital
audio decoding.
S-VIDEO OUTPUT - Connect to TVs with S-
9
VIDEO in for better picture quality than standard
composite video.
10
COMPONENT / PROGRESSIVE SCAN VIDEO
OUTPUT (Y Pb/Cr Pr/Cr)- Use this output with
TVs supporting Component Video or Progressive
Scan input for best video quality. Select the
PROGRESSIVE SCAN MODE in the Recorder's
SETUP MENU for P-SCAN TVs.
8
Functions
3 4 5 6
PLAY PAUSE
RECORD STAND BY
L AUDIO R VIDEO IN 2
8
7
5
9
11 10