Dvd Front Panel Functions - CyberHome CH-DVD 300 Owner's Manual

DVD Front Panel Functions

Multi-Speed Fast Forward search during playback and Skips to the next chapter or Track
Multi-Speed Fast Reverse search during playback and Skips to the previous Chapter or Track
When the unit is turned off by the Remote Control
it will enter Standby Mode. This mode is indicated
by a glowing RED. The Status LED can indicate
when Paused, Reading Disc, Backward/Forward
Scan, Bad or Unrecognized Disc, enabled Setup
CH-DVD 300
Quick Tips
When the unit is powered off by
the Remote Control, it will be in
standby mode. The Status LED
will be RED.
If the Remote Control is not
handy, you can bring the unit out
of Standby Mode by pressing the
Standby / On button on the front
bezel. The Status LED will be
GREEN.
If the Status LED is not RED or
Green, check the power switch
on the back or check your power
cord.
*
When player is in STANDBY mode, you press the following buttons to power on the player:
Standby/On
Play/Pause
Open/Close
Fast Reverse / Previous Track
Status LED
Menu and Playing Disc or ON.
Press to begin Playback. Press again to Pause.
Press to stop play but hold resume location.
Press again to completely stop play and reset
Turns ON Player and Plays Disc inside of Player
Turns ON Player and Plays Disc inside of Player
Turns ON Player and Opens Disc Tray
Fast Forward / Next Track
Open / Close*
Push to Open or Close the disc tray.
Play / Pause*
playback to beginning of disc.
Standby / On*
The front Button turns the unit On
and put the player to Standby Mode.
Status LED will be GREEN when
player is powered ON.
9
Stop