Recording Rear Input Connections; Selecting And Input Source - CyberHome DVR 1200MU Operation Manual

Recording
Recording to DVD Discs
With DVD+R/RW recording, you can create your own DVDs from your home movies, favorite TV shows or from other
video sources.
DVD+RW
Think of DVD+RW (DVD+ReWritable) discs as the
digital equivalent of your old VHS tapes. Like video tape,
DVD+RW discs can be recorded to, erased and re-used.
But unlike video tape, DVD+RW discs will retain their
crystal-clear digital quality even after being erased and
re-recorded over 1000 times! And, this superior quality
will not degrade with the passage of time like VHS
tapes.
Media Compatibility
We have heavily invested countless hours in compatibility testing to ensure we deliver a product that is compatible
with most media brands. However, 100-percent compatibility with all media is not guaranteed.
Recording- Rear Input Connections
REAR RECORDING INPUTS - There are (2) recording source inputs on the back panel, (1) S-VIDEO (referred to as
"S-VIDEO") and (1) Composite Video (referred to as "VIDEO 1"). Note that both of these video inputs share the
same stereo audio input.
Selecting an Input Source
You can easily select the AV input on this unit.
1
Connect the desired AV input source.
2
Press SOURCE and use the
your desired input source. Press ENTER.
3
You can now view the content from the AV source
you connected to the unit.
4
Insert a recordable DVD +R
or DVR +RW disc and press
REC to begin recording.
Audio/Video source such as
DVD player or VCR with
S- Video Out
The DVR 1200
Recorder
(REAR VIEW)
/ keys to select
Audio/Video source
such as a camcorder
with Composite
Video Out
S-Video In
S V R L
DVD+R
A lower-cost alternative to DVD+RW, these "Recordable"
discs cannot be erased. Once a recording is made to a
DVD+R disc, the disc space used by that recording can
never be reclaimed. DVD+R discs must be 'finalized'
before they can be played back on standard DVD
Players, and once this process is complete, no more
recordings can be added. This is an important difference
between DVD+R and DVD+RW Discs.
Formatting a Blank Disc
New discs need to be formatted before using for the first
time. Your unit will automatically detect an unformatted
disc and will notify you with a prompt. Simply select OK
when asked if you want to format the disc. Formatting
only takes around 20-45 seconds.
You may choose from the following
input sources:
Tuner - The DVD Recorder's built-in TV
Tuner allows you to record your favorite
TV programs. Your unit will automatically
scan for available channels the first time
you select Tuner as an input source.
VIDEO1 - The Composite Video Input
located at the back of the unit. Used for
any video device with Composite Video
Out.
S-VIDEO - Located on the back panel,
S-VIDEO provides a better picture than
Video Out
standard Composite Video. Use this
input for camcorders or other video
Right
Audio Out
devices when possible.
Left
DVD - This is your unit's internal DVD
drive. Since this is the drive your are
recording to, you cannot use this as an
input source. Select this when watching
DVD discs or playing images and music
files.
VIDEO2 - The Composite Video Input on
the Front Panel.
Made in China
17
Recording