Setting The Quality Mode; Saving The Schedule; Editing Or Deleting A Saved Schedule; Audio / Video - CyberHome DVR 1200MU Operation Manual

Changing Setup Options
Setting Start Time and Recording Length
1
The next field to make an entry in is the START
TIME, or when you would like to have the timer
recording begin recording. Use the
increase/decrease and
between fields.
By default, the Start times are set to the current time
2
and recording length to one hour.
08:00 PM
3
The next field is to enter the length of time you wish
to record for. Set hours and minutes here.
01:30
Setting Source
1
Next, select an input source or TV channel to record
from with the / keys. For TV channels, use the
number keys to specify your selection.
Video 1

Setting the Quality Mode

1
Specify the Recording Quality mode you wish to use
for the recording with the
HQ
Setting the Repeat Mode
The Recurrence setting indicates when the scheduled
recording will take place or repeat.
ONCE (No Repeat) - One time recording, specify a
Time, Date, etc. This event is deleted after the recording
Can be set up to 30 days in advance only.
DAILY - The recording is repeated every day and the
date setting is ignored.
WEEKLY - The recording is repeated once each week
on the day specified in the START time.
MON - FRI - Recording is repeated daily except on
Saturday and Sunday.
1
Select a Recurrence option with the
Once
The RESULTS field will return the current status of the
event:
Done - Recording is finished.
OK - Event is ready and waiting to record.
Overlap - Two events overlap, needs editing.
NOTE: Make sure a recordable disc is inserted
before a scheduled recording.
/ keys to
/ keys to navigate
/ keys.
/ keys.
21

Saving the Schedule

1
Press ENTER to add the entry to the schedule list
when all parameters are set.
2
To exit the Schedule Screen, press SCHEDULE.

Editing or Deleting a Saved Schedule

1
To change or delete a recording schedule, press the
SCHEDULE key to access the Schedule Screen.
Use the / to select the scheduled event to be
edited and press ENTER.

Audio / Video

These are the Setup features for your recorder's Audio
and Video functions. Press SETUP and navigate using
the / keys.

Downmix

DVDs usually feature Dolby 5.1 channel soundtracks,
you need to downmix these movies with only a stereo TV
or capable receiver. Stereo should be used for most TV
and stereo equipment. The LT/RT option should be used
with Dolby Pro Logic receivers.
Default setting : LT / RT

Dynamic Range

Default setting: OFF
Dynamic Range Control, also called "Midnight Mode"
reduces the difference between the low and high audio
levels known as compression. Makes watching movies
at low volume levels enjoyable.
Default setting : Off

SPDIF (Digital) Output

Determines the audio format output by the Optical and
Coaxial Digital Audio Output. When playing a Dolby 5.1
soundtrack, leave the setting on RAW to output the
encoded digital signal to a Digital Receiver with a Dolby
5.1 Decoder. If your receiver is not capable of decoding
a Dolby signal, use the PCM setting.
When playing CDs, leave this setting at PCM to output a
stereo signal on the Digital Output.
Default setting : RAW
Setup Menu