Parental Control; Angle Mark; Memory; Closed Caption (Cc) - CyberHome DVR 1200MU Operation Manual

Changing Setup Options

Parental Control

Your DVD Player features a Parental Control option. By
default, this option is set to the ADULT level, which will
allow play of all discs.
NOTE : remove any disc in the disc tray to access these
setup options. Available options include:
Rating Description
Suitable for all audiences.
1. Kid Safe
Suitable for general audiences.
2. G
Parental guidance suggested.
3. PG
4. PG-13
Parental guidance suggested,
unsuitable for children under 13.
5. PG-R Parental Guidance Recommended
- implications or very brief discreet
language or situations.
Restricted, violence, adult
6. R
language and situation unsuitable
for young viewers.
Adult theme or content, not suitable
7. NC-17
for children under 17.
8. Adult Adult themes, language and nudity.
To change Parental Control level:
1
A valid password is necessary to change Parental
levels. If you have defined your own user password,
enter that value. Otherwise, use the factory
password: 1369.
2
Use the / keys to select Parental Control from
the list.
3
Use the / keys to select a Rating Level.
4
Enter the password. OK will be selected.
Password
OK
5
Press ENTER to confirm your change.
Cancel
RETURN
23

Angle Mark

When used with discs supporting multi-angle features,
the Angle Mark continuously displays the current angle
you're viewing on screen. Setting ANGLE MARK to OFF
will cancel continuous display, and the current angle will
be displayed on-screen for just a few seconds after an
angle change.
Default setting : Off

Memory

This setting will remember where you stopped a DVD
disc and begin playback from that point when you press
PLAY or after the player comes out of STANDBY mode.
When set to OFF, DVD discs will always begin playback
at the beginning.
Default setting : On

Closed Caption (CC)

Not all discs support Closed Captions. However, setting
Closed Caption to On will display captions when
supporting discs are used. If you don't wish to
automatically enable captions, set this option to Off.
Default setting : Off
Setup Menu