Playback; Disc Playback; Inserting A Disc; Starting, Stopping & Pausing Playback - CyberHome DVR 1200MU Operation Manual

Disc Playback

Inserting a Disc

1
Press the OPEN/CLOSE button on the remote or
front panel to open the disc tray.
2
Insert the disc, being careful not to touch the
playing surface. Hold the disc by the sides and with
your fore finger through the hold in the middle and
insert gently into the tray.
3
Close the disc tray by pressing OPEN / CLOSE on
the remote or front panel.
Starting, Stopping and Pausing Playback
1
PLAY - To begin playback of a disc, press the PLAY
key or PLAY/PAUSE button.
2
STOP - To stop playback, press STOP. The first
time STOP is pressed the location where disc play
was halted is saved, and you can begin playback
where you left off by pressing PLAY. If STOP is
pressed twice, the playback location is reset to the
beginning of the disc.
3
PAUSE - To freeze the video on a single frame or
pause music, press the PLAY/PAUSE (Front
Panel) or PAUSE (Remote Control) key during
playback. To resume normal playback, press
PLAY/PAUSE (Front Panel) or PLAY (Remote
Control).

Fast Forward / Reverse Scanning

You can scan in forward or reverse on DVDs and VCDs
at various speeds during playback.
1
To use the Fast Forward/Reverse function with the
remote control, press the
cycle through all speeds in the desired direction. To
resume normal playback, press the PLAY key.

Skipping to the Next / Previous Chapter

You can advance or skip back through the chapters or
tracks on DVD discs, Audio CDs and other discs with the
NEXT and PREVIOUS buttons on the remote.
1
SKIP NEXT - To advance to the next chapter or
track, press on the remote control or front panel.
2
SKIP PREVIOUS - Press
to skip back to the previous track.
or key repeatedly to
on the remote control
13

Using Disc Menus

PLAY MOVIE
SPECIAL FEATURES
SCENE SELECTION
AUDIO SETUP
Most DVDs will automatically display a menu after the
disc is inserted. This menu is known as the "root" menu.
1
Use the / and /
to navigate the menu to make a selection.
2
Press ENTER to begin playing the movie.
3
To return to previous layers of the menu, use the
RETURN key.
4
To return to the menu after disc play has started,
use the MENU key.
1. Chapter One PLAY MOVIE
2. Chapter Two
3. Chapter Three
4. Chapter Four
5
With SVCD discs, press PBC (Playback Control), to
enable or disable the PBC function. The PBC
function enables a MENU on SVCD discs that
support this feature. Select the corresponding
number for the Chapter you wish to play with the
NUMBER keys.

Slow Motion Playback

This unit supports slow motion playback in the forward
direction at various speeds.
1
During playback, press the SLOW key repeatedly to
select a slow motion speed or to resume normal
play.

Muting the Sound

1
Press the MUTE button on the remote to temporarily
cancel the audio signal at any time.
2
Press MUTE again to resume normal audio.

Playback

keys on the remote control