Download Print this page

Whirlpool ACMT 6130/WH/2 Operating Instructions Manual page 4


This appliance is designed solely for domestic usage. No other use is permitted (e.g. heating
rooms). To aim the appliance as professional use is forbidden. The manufacturer declines all
responsibility for innapropriate use or incorrect setting of the controls.
This appliance is intended to be used in household and similar applications such as :
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses;
- By clients in hotels, motels and other residential environments;
- Bed and breakfast type environments.
CAUTION : The appliance is not intended to be operated by means of an external timer or separate
remote controlled supply system.
Do not use the appliance outdoors.
Do not store explosive or flammable substances such as aerosol cans and do not place or use
gasoline or other flammable materials in or near the appliance: a fire may break out if the
appliance is inadvertently switched on.
Installation and repairs must be carried out by a qualified technician, in compliance with the
manufacturer's instructions and local safety regulations. Do not repair or replace any part of the
appliance unless specifically stated in the user manual.
The electrical and gas connections must comply with local regulation.
Children should not perform installation operations. Keep children away during installation of the
appliance. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of
children, during and after the installation of the appliance.
WARNING : Modification of the appliance and its method of installation are essential in order to use the
appliance safely and correctly in all the additional countries
Use protective gloves to perform all unpacking and installation operations.
After unpacking the appliance, make sure that the appliance door closes properly. In the event of
problems, contact the dealer or your nearest After-sales Service. To prevent any damage, only
remove the oven from its polystyrene foam base at the time of installation.
The appliance must be handled and installed by two or more persons.
The appliance must be disconnected from the power supply before carrying out any installation
During installation, make sure the appliance does not damage the power cable.
Only activate the appliance when the installation procedure has been completed.
Kitchen units in contact with the appliance must be heat resistant (min 90°C).
WARNING : Prior to installation, ensure that the local gas delivery conditions (nature or pressure) are
compatible with the setting of the hob (see the rating plate and injector table).
Use pressure regulators suitable for the gas pressure indicated in the instruction.
WARNING : The adjustment condictions for this appliance are stated on the lable (or data plate).
WARNING : This appliance is not connected to a combustion products evacuation device. It shall be
installed and connected in accordance with current installation regulations. Particulat attention shall
be given to the relevant requirements regarding ventilation.



This manual is also suitable for:

Acmt 6130/ix/2