Varian Turbo-V 2000 ICE Instruction Manual page 91

•
Enter the selection
CURRENT push-button, and the display shows:
F R O N T / R E M O T E
S E L E C T I O N : X X X X X X
where: XXXXXX = means the word FRONT. REMOTE, or
SER depending on the last selection.
The controller is factory-set for FRONT panel operation.
SER will only be displayed if the optional serial card is
installed.
•
Choose the desired selection by pressing the CYCLE
push-button.
F R O N T / R E M O T E
S E L E C T I O N :
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
by pressing the PUMP
/ S E R
/ S E R
F R O N T
•
Press PUMP CURRENT push-button and the display
shows:
S E R I A L
This message will only be displayed if the RS 485 module
is installed.
Where:
XX = 00 ÷ 31 is the unit address
•
Press the PUMP CURRENT push-button to enter the
value and, if the serial option is installed, the display
shows:
R S X X X
B A U D R A T E
84
TECHNICAL INFORMATION
A D D R E S S
X X
X X X X
87-900-929-01 (H)