Cisco SPA525G2 Owner's Manual page 41

Hide thumbs Also See for SPA525G2:
Table of Contents

Advertisement

a.
Phone – Your IP phone pairs with a Bluetooth headset only.
Choose this option if you will not use the Cisco IP phone with
a Bluetooth-enabled mobile phone.
b.
Handsfree - Your IP phone will operate as a handsfree
device with a Bluetooth-enabled mobile phone.
c.
Both - Your Cisco IP phone uses a Bluetooth headset or
operates with a Bluetooth-enabled mobile phone. Your IP
phone will connect to only one device at a time (either the
Bluetooth headset or the Bluetooth-enabled mobile phone.
6.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter
the profile screen
7.
Press Scan to scan for your mobile phone. Ensure the mobile phone
is powered on and has Bluetooth activated.
8.
In the list of found devices, select your mobile phone and press
Select to edit the profile
9.
Scroll to PIN and enter the PIN for your mobile phone
10. Scroll to Connect Automatically and press the Right Arrow key to
turn to On
11. Press Connect
USB Support
Your phone possesses a USB 2.0 port. This port can be used to import
security certificates, connect an MP3 player, connect external storage or
charge your mobile device.
Wi-Fi Support
Your phone comes with built-in Wi-Fi capabilities. It may be connected
wirelessly to your network. This method of connection is not recommended,
and can result in poor quality phone calls.
VPN Support
Your phone administrator can set up a VPN that allows you to use your phone
at an offsite location to securely connect to the company phone network over
the Internet. You must get from your phone administrator the IP address of
the VPN, your username, and password. To configure your phone for use with
a VPN:
1.
Press Setup
2.
Scroll to Network Configuration and press Select
3.
Scroll to VPN and press the Right Arrow key
4.
Enter the IP address of the VPN server provided by your phone
administrator
5.
Press the Down Arrow key and enter your user name
6.
Press the Down Arrow key and enter your password
7.
Press the Down Arrow key and enter the tunnel group
8.
Press Set
41

Advertisement

Table of Contents
loading

Table of Contents