Epson Run Connect - Epson SF-510 User Manual

Epson Run Connect

The Run Connect application allows you to upload workout data to the RUNSENSE View web portal. You can also
use Run Connect to adjust various settings on your RUNSENSE product directly from your computer.
Note:
See the following pages for information on how to install Run Connect.
See "Installing Epson Run Connect software" on page 52.
Login screen
Model Settings - AT Lap settings screen (SF-710 only)
Model Settings - Target Pace settings screen (SF-710 only)
Using your SF-510/710 with a computer
You can set up a RUNSENSE View account, upload
measurement data, and start RUNSENSE View from this
screen.
See "Using RUNSENSE View" on page 50.
You can also access the Model Settings screen and adjust AT
Lap, Target Pace, and Interval settings.
Adjust the AT Lap function to automatically record laps
whenever a set time or distance is reached.
"Adjusting the AT Lap settings (SF-710 only)" on page 73
You can use the Target Pace function to sound an alarm if you
fall behind your preset pace.
"Setting the Target Pace Function (SF-710 only)" on page 74
70