Calibrating The Sensor; Measurable Items - Epson SF-510 User Manual

Calibrating the sensor

When using the product for the first time, you need to run continuously for a certain amount of time to make sure
that your stride is accurately detected by the sensor. Follow these guidelines to ensure the product learns your
specific running style quickly:
O If you are outside with no obstructions overhead, make sure you run for approximately 10 minutes.
O If you are surrounded by tall buildings, make sure you run for approximately 30 minutes.
You only need to do this the first time you use the SF-510/SF-710 and if you reset the product.
Note:
If you plan to use the product to measure running, run at your usual pace when you calibrate the sensor. Errors may occur
if your typical stride pattern is significantly different from your initial calibration.
See "Measuring time, distance, and speed" on page 30.

Measurable items

Items that can be measured change according to the GPS settings and whether or not you are using the optional
heart rate chest strap.
When GPS tracking is off (indoor mode), your route is not recorded.
: Can be measured
- : Cannot be measured
* : Cannot be measured during indoor mode
Setting up your SF-510/SF-710
See "Indoor mode" on page 19.
21