Screen Display - Epson SF-510 User Manual

Note:
The screen shown may differ depending on the settings
you've selected.
See "Screen Layout options" on page 88.
4
Press C to stop measuring at any time; you can
press C again to resume measuring.
5
Hold down D while measuring is stopped to
reset the Measurement screen.

Screen display

Measurement screen
There are different measurement screens available. Each screen shows different information about your current
activity. Press A to switch between these screens.
Note:
You can change the number of lines displayed and the measurements displayed for each screen.
See "Screen settings" on page 86.
Screen
Screen1
Measuring your workouts
The data measured up to that point is stored in
the product's memory. You can check your past
workouts by pressing D on the Time screen.
Note:
To stop measuring and return to the Time screen, do one
of the following:
O After resetting the measurement results in step 5,
hold down A.
O While the screen in step 4 is displayed while
measurement is stopped, hold down C. The
measurement results are reset and the Time screen
is displayed.
O If no operations are made for 60 minutes on a
screen other than the measuring screen, the Time
screen is displayed.
Default display
3 Lines
31
See "Viewing past workouts" on page 48.
Default measurements shown
Distance
Split Time
Average Pace