Epson SF-510 User Manual page 16

After placing the product into the bottom of the cradle with the LCD screen facing out, push carefully on the
top of the product until it clicks into place.
c
Important:
Make sure the product is placed in the correct direction; otherwise, the product or the cradle could be
damaged.
When the product is placed in the correct direction, the alarm sounds, the charging screen is displayed, and
charging starts.
A full charge normally takes approximately 2.5 to 3.5 hours, but charging time may vary.
When the battery icon on the LCD screen displays 100%, charging is complete.
Note:
When the battery icon displays 100%, charging automatically stops. The product will not be damaged even if you
continue to charge the battery.
Setting up your SF-510/SF-710
15