Charging
Before use
c
Important:
O Make sure you use the cradle that came with this product.
O Do not place the product in the cradle when the product is wet.
The contact points on the cradle and the product could corrode, malfunction, or cause a communication
failure.
O Do not press any buttons when the product is wet or you may damage the product.
If the product is wet, wipe the contact points and sensor lightly with a damp cloth to remove any sweat or dirt, wipe
it with a dry cloth to remove any excess water, then let the product air dry before placing it in the cradle.
See "Caring for your product" on page 94.
Setting up your SF-510/SF-710
Contact points
13