Installing Epson Run Connect Software; Creating A Runsense View Account - Epson SF-510 User Manual

Installing Epson Run Connect software

If you are using your product with a Windows PC, you need Run Connect to upload measurement data to
RUNSENSE View.
Follow the steps below to install Run Connect.
1
Visit epson.com/support/sf510 or epson.com/support/sf710 (U.S.) or epson.ca/support/sf510 or
epson.ca/support/sf710 (Canada) and download Run Connect.
2
Run the downloaded file and follow the on-screen instructions.

Creating a RUNSENSE View account

You need to create a RUNSENSE View account before you start uploading your workout data.
1
Connect the cradle to your computer using the USB cable.
2
Place the product into the cradle.
Check that the contact points on the product are pointing up and match the contact marks on the cradle.
After placing the product into the bottom of the cradle with the LCD screen facing out, push carefully on the
top of the product until it clicks into place.
c
Important:
Make sure you place the product in the cradle correctly or you may damage your product.
Using RUNSENSE View
52