Epson SF-510 User Manual page 42

The Goal Measurement screen is displayed.
Measuring
1
Press C on the Goal Measurement screen to start
measuring.
2
When your goal time or distance is reached, the
Finish screen is displayed.
The time, distance, and calories burnt are
displayed.
Note:
An alarm notifies you when you reach 50% and
90% of your goal time or distance.
3
Press C to stop measuring.
Measuring your workouts
4
Note:
Do any of the following to stop measuring and return to
the Time screen:
O After resetting the measurement results in step 4,
hold down A.
O While the screen in step 3 is displayed, hold down
C. The measurement results are reset and the Time
screen is displayed.
O If you do not press any buttons for 60 minutes on a
screen other than the Measurement screen, the
Time screen is displayed.
41
Hold down D while measuring is stopped to
reset the screen.
Data measured up to that point is stored in the
product's memory. You can check it by pressing
D on the Time screen.
See "Viewing past workouts" on page 48.