Charging - Epson SF-510 User Manual

Charging

c Important:
O Charge the product before using it for the first time.
O The product will not charge if the temperature is below 41° F (5° C) or above 95° F (35° C). If the temperature
is too low or high when you charge the product, the following error screen is displayed, and charging stops.
When the product returns to a suitable temperature, charging resumes.
1
Connect the cradle using one of the following methods:
O Using a computer
Connect the cradle's USB plug to the computer's USB port.
This is not guaranteed to work with all computers. Do not use a USB hub. Connect the cradle directly to
the computer.
O Using the AC adapter
Connect the cradle's USB plug to the AC adapter's USB port.
We recommend using the optional AC adapter (model no. SFAC04/part no. E12E204001). If you do not
use a supported AC adapter, you may not be able to charge the product or it may not operate correctly.
2
Place the product into the cradle.
Check that the contact points on the product are pointing up and match the contact marks on the cradle.
Setting up your SF-510/SF-710
14