Kenwood BM260 Manual page 8

using your Bread Maker
(refer to illustration panel)
1 Remove the bread pan by holding the handle and
turning the pan to the back of the baking chamber.
2 Fit the kneader.
To prevent spillages inside the oven
●
chamber, always remove the bread pan from
the machine before adding the ingredients.
Ingredients that splash onto the heating
element can burn and cause smoke.
3 Pour the water into the bread pan.
4 Add the rest of the ingredients to the pan in the order
listed in the recipes.
Ensure that all the ingredients are weighed accurately
7 as incorrect measures will produce poor results.
8 Insert the bread pan into the oven chamber by
positioning the bread pan at an angle towards the
back of the unit. Then lock the pan by turning it
towards the front.
9 Lower the handle and close the lid.
10 Plug in and switch on - the unit will beep and default
to setting 1 (3:50).
11 Press the MENU button
is selected. The bread maker will default to 1Kg &
medium crust colour. Note: If using the "eco BAKE",
just press the eco button
start automatically.
12 Select the loaf size by pressing the LOAF SIZE
button until the indicator
bp
loaf size.
13 Select the crust colour by pressing the CRUST button
until the indicator
bm
colour (light, medium or dark).
14 Press the START/STOP button
the program press the START/STOP button
hold down for 2 -3 seconds.
15 At the end of the baking cycle unplug the bread
maker.
16 Remove the bread pan by holding the handle and
turning the pan to the back of the baking chamber.
Always use oven gloves as the pan handle
●
will be hot.
17 Then turn out onto a wire rack to cool.
18 Leave the bread to cool for at least 30 minutes before
slicing, to allow the steam to escape. The bread will
be difficult to slice if hot.
19 Clean the bread pan and kneader immediately after
use (see care and cleaning).
until the required program
bl
and the program will
bo
moves to the required
bs
moves to the required crust
ck
. To stop or cancel
bq
and
bq
4