[Initial Startup]; [Last Memory] - Panasonic PT-RZ475EA Operating Instructions Manual

[COMMAND]
[INPUT]
[DIGITAL LINK INPUT]
[LIGHT POWER]
[IN STANDBY MODE(AUDIO)]
[VOLUME]
*1 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the
projector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it
is disabled.
10) Press the <ENTER> button.
f The [COMMAND] detailed screen is displayed.
11) Press as to select a [COMMAND].
f For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw.
12) Press the <ENTER> button.
f The command is fixed and n is displayed at the left of the selected command.
f After the command is fixed, press the <RETURN> button or the <MENU> button to close the detailed setting menu.
13) Press as to select [STORE], and press the <ENTER> button.
Note
f When deleting commands that have already been set, press the <DEFAULT> button on the screen displayed in step 5).
f If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command
number.
f The operating time will be the local time. (x page 92)
f If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with this function may not be executed.

[INITIAL STARTUP]

Set the startup method when the <MAIN POWER> switch is set to <ON>.
1) Press as to select [INITIAL STARTUP].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[LAST MEMORY]

[STANDBY]
[ON]
86 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Detailed settings of
[COMMAND]
[COMPUTER]
[VIDEO]
[DVI-I]
[HDMI]
[DIGITAL LINK]
[CURRENT]
[INPUT1] - [INPUT10]
*1
[NORMAL]
[ECO1]
[ECO2]
[OFF]
[ON]
[0] - [63]
Starts the projector in the condition before the <MAIN POWER> switch is set to <OFF>.
Starts in standby.
Starts projecting immediately.
Description
Switches the input to COMPUTER.
Switches the input to VIDEO.
Switches the input to DVI-I.
Switches the input to HDMI.
Sets the input to DIGITAL LINK.
Switches to DIGITAL LINK input with the currently selected
connection.
Can only be selected when [INPUT] is set to [DIGITAL LINK].
Switches to DIGITAL LINK input, and that input switches to the
specified input when the Panasonic twisted-pair-cable transmitter is
connected. Can only be selected when [INPUT] is set to [DIGITAL
LINK].
Prioritizes brightness.
Controls the power to extend the life of the light source while
maintaining high luminance.
Controls the power to maximize the life of the light source although
luminance will decrease.
Turns off audio output during standby.
Turns on audio output during standby.
Sets the volume.