Table of Contents
Advertisement
[SYSTEM SELECTOR]
The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the
system method matching the input signal.
1)
Press as to select [SYSTEM SELECTOR].
2)
Press the <ENTER> button.
3)
Press as to select a system format.
f Available system formats vary depending on the input signal.
Terminal
<VIDEO IN> terminal
<COMPUTER IN> terminal,
<DVI-I IN> terminal
<DVI-I IN> terminal
<HDMI IN> terminal
*1 When [DVI-I IN] is set to [ANALOG].
*2 When [DVI-I IN] is set to [DIGITAL].
4)
Press the <ENTER> button.
Note
f Refer to "List of compatible signals" (x page 133) for the types of video signals that can be used with the projector.
f This may not function properly for some connected external devices.
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1)
Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 69).
2)
Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" (x page 51).
3)
Press as to select [PICTURE MODE].
4)
Press qw to set [NATURAL].
5)
Press as to select [COLOR].
6)
Press the <DEFAULT> button on the remote control to set the factory default settings.
7)
Follow Steps 5) to 6) to set [TINT] and [COLOR TEMPERATURE] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
Chapter 4 Settings — [PICTURE] menu
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL],
[PAL-M], [PAL-N], [SECAM], or [PAL60].)
Switch the setting to the signal method for the TV used.
480i, 576i, or 576p signal
VGA60 or 480p signal
*1
Other movie-based signals
480p or 576p signal
*2
Other movie-based signals
480p or 576p signal
Other movie-based signals
System format
Select [RGB] or [YC
C
].
B
R
Select [VGA60], [480p], or [480pRGB].
Select [RGB] or [YP
P
].
B
R
Select [RGB], [YC
C
444], or [YC
B
R
Select [RGB], [YP
P
444], or [YP
B
R
Select [AUTO], [RGB], [YC
C
B
R
Select [AUTO], [RGB], [YP
P
444], or[YP
B
R
C
422].
B
R
P
422].
B
R
444], or[YC
C
422].
B
R
P
422].
B
R
ENGLISH - 55
Advertisement
Chapters
Table of Contents
