Panasonic PT-RZ475EA Operating Instructions Manual page 74

[7]
[8]
[9]
[1]
[2]
[3]
[4]
Setting [OSD DESIGN]
Set the color of the menu screen (OSD).
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [OSD DESIGN].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[1]
[2]
[3]
[4]
[5]
[6]
Setting [OSD MEMORY]
Set hold for the position of the menu screen (OSD) cursor.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [OSD MEMORY].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f Even if [OSD MEMORY] is [ON], the cursor position is not held when the projector is switched off and in standby mode.
Setting [INPUT GUIDE]
Set whether to display the input guide (input terminal name, signal name, and memory number currently selected) in the position set in the
[OSD POSITION].
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
74 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Sets to the upper right of the screen.
Sets to the center right of the screen.
Sets to the bottom right of the screen.
Sets to the upper left of the screen.
Sets to the center left of the screen.
Sets to the bottom left of the screen.
Sets to the top center of the screen.
Sets to yellow.
Sets to blue.
Sets to white.
Sets to green.
Sets to peach.
Sets to brown.
Holds the cursor position.
Does not hold the cursor position.
Displays the input guide.
Hides the input guide.