Initial Setting (Projector Setup) - Panasonic PT-RZ475EA Operating Instructions Manual

Initial setting (projector setup)

Set [PROJECTION METHOD] and [COOLING CONDITION] depending on the installation mode. Refer to "Installation mode" (x page 27)
for details.
Then, set the screen format (aspect ratio) and display position of the image.
After completing the initial setting, you can change the settings of each item from the [PROJECTOR SETUP] menu and the [DISPLAY
OPTION] menu → [SCREEN SETTING].
1) Press asto select an item.
2) Press qw to switch the setting.
3) Press the <ENTER> button.
f Fix the setting value to complete the initial setting.
Note
f If you press the <RETURN> button on the initial setting (projector setup) screen, you can go back to the initial setting (display language)
screen.
f To continue operations after completed the initial settings (projector setup), refer to "Selecting the input signal" (x page 39).
f To perform focus adjustment while the initial setting screen is displayed, press the <FUNC3> button on the remote control. The focus
adjustment screen is displayed.
f By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTOR
SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Chapter 1 Preparation — Start-up display
INITIAL SETTING
PROJECTION METHOD
COOLING CONDITION
SCREEN FORMAT
SCREEN POSITION
MENU SELECT
SET
ENTER
FRONT/FLOOR
FLOOR SETTING
16:9
CHANGE
ENGLISH - 21