Table of Contents
Advertisement
Crestron TPS-XVGA-BV
Touchpanel Setup
Configuring the Touchpanel
To configure the touchpanel for RGB computer video input, consult the
latest revision of the TPS-5000 or TPS-6000 Operations Guide (Doc.
5863 or 5864, respectively). The latest version of the Operations Guide
can be obtained from the Products page (PRODUCT MANUALS
section) or the Downloads page (MANUAL Library) of Crestron's
website (www.crestron.com). New users are required to register in order
to obtain access to the FTP site.
Configure the touchpanel with the TPS-XVGA-BV properly installed.
Upon entering the Setup Menu, an RGB button will be available and
displayed. Selection of this button opens the RGB Menu from which
RGB settings are adjusted.
SIMPL
No special programming is required in SIMPL Windows for
TPS-XVGA-BV operation.
NOTE: Join number remapping allows the Isys touchpanel to perform
features in a new way. One group of features pertains specifically to use
of the RGB Computer Interface Card with Balanced Video. Refer to the
latest revision of the Join Number Remapping Reference Guide (Doc.
5969) for specific details. This document can be obtained from the
Downloads page (MANUAL Library, search for JNR.PDF) of Crestron's
website (www.crestron.com).
VT Pro-e Setup
In order for the RGB video to be displayed, the TPS-XVGA-BV must be
installed into the proper expansion slot of the TPS-5000 or TPS-6000 and
a RGB window object must reside on a page within the uploaded VT
Pro-e touchpanel project in order for the computer video to be displayed.
If the card is not present, the Viewport will display a warning message
during the upload and the RGB window would be blank. For details
regarding RGB window objects, refer to the VT Pro-e help file.
Operations & Installation Guide - DOC. 5920
RGB Computer Interface Card for TPS/Tilt Panel
™
®
Windows
RGB Computer Interface Card with Balanced Video for TPS/Tilt Panel: TPS-XVGA-BV
Programming
13
Advertisement
Table of Contents
