Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron TPS-IMC
Summary of Contents for Crestron TPS-IMC
-
Page 2: Table Of Contents
Network Wiring... 4 Hardware Hookup... 5 Problem Solving... 7 Troubleshooting... 7 Further Inquiries ... 7 Return and Warranty Policies ... 8 Merchandise Returns / Repair Service... 8 CRESTRON Limited Warranty ... 8 Operations Guide - DOC. 5856 Interface Module Contents... -
Page 3: Interface Module: Tps-Imc
At the shorter sides of the TPS-IMC, the enclosure extends to form feet at a right angle to the side. There are three holes per foot for inserting screws to further stabilize the unit to a mounting surface. - Page 4 Cresnet Network Interconnect Drawing (Doc. 5411). This document can be obtained from the Downloads page (CABLES and MANUAL Libraries) of the Crestron website (www.crestron.com). Search for CRESNET.PDF. AUDIO – This 8-position RJ45 mates with the TPS-5000 or TPS-6000 touchpanel.
- Page 5 Power (Network) Ground (Network) Chrominance (Positive) Chrominance (Negative) Data (Network) Data (Network) Luminance (Positive)/Composite Luminance (Negative)/Composite Ground (Network) +24V Power (Network) DESCRIPTION Positive Negative Shield DESCRIPTION Shield Right Positive Right Negative Left Positive Left Negative Shield Interface Module Interface Module: TPS-IMC...
-
Page 6: Leading Specifications
Leading Specifications for the TPS-IMC SPECIFICATION Dimensions Weight As of the date of manufacture, the TPS-IMC has been tested and found to comply with specifications for CE marking. Setup Network Wiring NOTE: When making wire connections, refer to the latest revision of the Cresnet Network Interconnect Drawing (Doc. -
Page 7: Hardware Hookup
Repeat the procedure for the other three network conductors. Hardware Hookup The TPS-IMC serves as an interface between the touchpanel and the Cresnet system. Refer to the illustration after this paragraph (which continues on next page) for proper connections; apply power last. When making network connections to the CNX Generation control system or Cresnet peripherals, refer to the latest revision of the Cresnet Network Interconnect Drawing (Doc. - Page 8 If there is no video, do not make a connection to this port, but leave connector and jumpers attached to the NTSC/PAL VIDEO six-pin connector on the TPS-IMC. Video balance is determined by external connections. Refer to the three diagrams below.
-
Page 9: Problem Solving
No power to the touchpanel. Further Inquiries If after reviewing this Operations Guide for the TPS-IMC, you cannot locate specific information or have questions, please take advantage of Crestron's award winning technical support team by calling: In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400. -
Page 10: Return And Warranty Policies
CRESTRON shall not be liable to honor warranty terms if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.