Table of Contents
Advertisement
RGB Computer Interface Card for TPS/Lectern Panel Crestron TPS-XVGAL
TPS User Interface Setup
Configuring the TPS User Interface
To configure the TPS user interface to accept the RGB computer video
input, consult the latest revision of the appropriate interface operations
guide. The latest version of the guide can be obtained from the Products
page (PRODUCT MANUALS section) or Downloads page (MANUAL
Library) of Crestron's website (www.crestron.com) . New users are
required to register in order to obtain access to the FTP site.
Configure the TPS user interface with the TPS-XVGAL properly
installed. Upon entering the Setup Menu, an RGB button will be
available and displayed. Selection of this button opens the RGB Menu
from which RGB settings are adjusted.
SIMPL
No special programming is required in SIMPL Windows for
TPS-XVGAL operation.
NOTE: Join number remapping allows the TPS user interface to
perform features in a new way. One group of features pertains
specifically to use of the RGB computer interface card. Refer to the latest
revision of the Join Number Remapping Reference Guide (Doc. 5969)
for specific details. This document can be obtained from the Downloads
page (MANUAL Library, search for JNR.PDF) of Crestron's website
(www.crestron.com).
VT Pro-e Setup
In order for the RGB video to be displayed, the TPS-XVGAL must be
installed into the proper expansion slot of the TPS user interfaces and a
RGB window object must reside on a page within the uploaded VT Pro-e
project. If the card is not present, the Viewport will display a warning
message during the upload and the RGB window would be blank. For
details regarding RGB window objects, refer to the VT Pro-e help file.
10 • RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL
™
®
Windows
Programming
Operations & Installation Guide - DOC. 5945
Advertisement
Table of Contents
