Table of Contents
Advertisement
RGB Computer Interface Card for TPS/Tilt Panel
Touchpanel Setup
Configuring the Touchpanel
To configure the touchpanel for RGB computer video input, consult the
latest revision of the TPS-5000 or TPS-6000 Operations Guide (Doc.
5863 or 5864, respectively). The latest version of the Operations Guide
can be obtained from the Products page (PRODUCT MANUALS
section) or the Downloads page (MANUAL Library) of Crestron's
website (www.crestron.com). New users are required to register in order
to obtain access to the FTP site.
Configure the touchpanel with the TPS-XVGA properly installed. Upon
entering the Setup Menu, an RGB button will be available and displayed.
Selection of this button opens the RGB Menu from which RGB settings
are adjusted.
SIMPL
No special programming is required in SIMPL Windows for TPS-XVGA
operation.
NOTE: Join number remapping allows the Isys touchpanel to perform
features in a new way. One group of features pertains specifically to use
of the RGB Computer Interface Card. Refer to the latest revision of the
Join Number Remapping Reference Guide (Doc. 5969) for specific
details. This document can be obtained from the Downloads page
(MANUAL Library, search for JNR.PDF) of Crestron's website
(www.crestron.com).
VT Pro-e Setup
In order for the RGB video to be displayed, the TPS-XVGA must be
installed into the proper expansion slot of the TPS-5000 or TPS-6000 and
a RGB window object must reside on a page within the uploaded VT
Pro-e touchpanel project. If the card is not present, the Viewport will
display a warning message during the upload and the RGB window
would be blank. For details regarding RGB window objects, refer to the
VT Pro-e help file.
12
RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA
™
®
Windows
Programming
Operations & Installation Guide - DOC. 5944
Crestron TPS-XVGA
Advertisement
Table of Contents
