Table of Contents
Advertisement
RGB Computer Interface Card for TPS/Tilt Panel
Supplied with the TPS-XVGA-BV is a TPS-IMC-BV Interface Module
that serves as an interface between the touchpanel and the video source
computer and/or the Crestron remote control system (herein referred to as
the Cresnet system) and a triamese cable (three shielded cables within a
single jacket, shown below). When a TPS touchpanel is equipped with
optional TPS-VID and TPS-XVGA expansion cards, individual cables
(including a cable for the audio input) are required. The TPS-IMC-BV
and triamese cable minimize the number of cables attached to the
touchpanel, only the triamese cable is needed for all three inputs.
Triamese Cable
For further information, consult the TPS-IMC-BV Operations Guide
(Doc. 5921). The latest revision can be obtained from the Products page
(PRODUCT MANUALS section) or Downloads page (MANUAL
Library) of Crestron's website (www.crestron.com). New users are
required to register to obtain access to the FTP site.
Physical Description
The TPS-XVGA-BV, shown below and continued on the next page, is a
printed circuit board (PCB) designed to be installed into a specific
expansion slot in the TPS touchpanel. The card is secured to the
motherboard of the touchpanel with four supplied mounting screws.
2
RGB Computer Interface Card with Balanced Video for TPS/Tilt Panel: TPS-XVGA-BV
Crestron TPS-XVGA-BV
15 FEET
(4.57 METERS),
PN CA15884-1
10-POSITION
NET/VIDEO
CONNECTORS
10-POSITION
RGB
CONNECTORS
8-POSITION
AUDIO
CONNECTORS
Operations & Installation Guide - DOC. 5920
Advertisement
Table of Contents
