Table of Contents
Advertisement
Crestron TPS-IMC-BV
Leading Specifications
Setup
Operations Guide - DOC. 5921
AUDIO INPUT Pinouts (6-Pin Port)
PIN
DESCRIPTION
S
Shield
R+
Right Positive
R-
Right Negative
L+
Left Positive
L-
Left Negative
S
Shield
MIC OUT – The port mates with a three-pin connector, supplied, and
produces line level differential output. Description of the pinouts is
shown in the table after this paragraph.
MICROPHONE Pinouts
PIN
DESCRIPTION
M+
Positive
M-
Negative
S
Shield
BAL/COAX Video Switch
A single two-position toggle switch is centrally located on the top panel of the
TPS-IMC-BV. Each position is labeled on the unit. Use the switch to select between
balanced video (BAL) and unbalanced video (COAX).
The table after this paragraph provides a summary of leading specifications for the
TPS-IMC-BV. Dimensions and weight are rounded to the nearest hundredth unit.
Leading Specifications for the TPS-IMC-BV
SPECIFICATION
Dimensions
Weight
As of the date of manufacture, the TPS-IMC-BV has been tested and found to
comply with specifications for CE marking.
Network Wiring
NOTE: When making wire connections, refer to the latest revision of the Cresnet
Network Interconnect Drawing (Doc. 5411). The document can be obtained from the
Downloads page (CABLES and MANUAL Libraries) of the Crestron website (www.
crestron.com). Search for the CRESNET.PDF files.
Interface Module
DETAILS
Height: 3.20 in (8.13 cm)
Width: 7.70 in (19.56 cm)
Depth: 1.25 in (3.18 cm)
1.15 lb (0.52 kg)
Interface Module: TPS-IMC-BV
5
Advertisement
Table of Contents
